Re: [Flash Operator Panel] Flash Operator Panel

[Jonathan Nalley <jnalley@xxxxxxx>]

ok, thanks for the response.  well what's happening is basically because of 
Trixbox/FreePBX/AMP and not really FOP.  I'm not sure about Trixbox V2, but on 
earlier versions of trixbox/A@x, you need to make certain changes to the layout 
in /var/www/html/admin/retrieve_op_conf_from_mysql.pl  (can't guarantee the 
preciseness of that path)  The path might also be:
/var/lib/asterisk/bin/retrieve_op_conf_from_mysql.pl

In that file you'll see lines like the following:

######## STYLE INFO #########
$extenpos="1-27,29-31,33-45";
$trunkpos="46-60";
#$confepos="";
#$queuepos="42-50,61-70";


Notice how in the code that i pasted above that the lines for queues and 
conferences are commented out which in essence does not display them at all.  
Notice how you can specify the range of positions that trunk and extension 
buttons can consume.

What i would recommend is make whatever changes you need to the position ranges 
of the buttons and then go and make whatever changes you need to make in 
FreePBX/AMP and when you save/apply those changes, the 
retrieve_op_conf_from_mysql.pl script will be run and (all other things being 
OK) FOP should act based on the changes to the positions you made.

I hope i haven't been too vague or unclear.  If you have any more questions, 
just respond back.


On Wednesday, March 28, 2007 1:37:33 PM , "Chu Seow Phin" <seowphin@xxxxxxxxx> 
wrote:
> Hi Jonathan
> I am using Trixbox V2
>
> Rgds.
> Chu
>
> -----Original Message-----
> From: Jonathan Nalley [mailto:jnalley@xxxxxxx] 
> Sent: Thursday, March 29, 2007 1:00 AM
> To: operator_panel@xxxxxxxxxxxxxxxxxx
> Subject: Re: [Flash Operator Panel] Flash Operator Panel
>
> are you using trixbox or Asterisk@xxxx or something of that nature?  It
> sounds like your FOP configuration files are getting overwritten when you
> make changes in AMP/FreePBX etc...
>
> Let us know what you're using and we can probably alleviate your
> frustration.
>
> On Wednesday, March 28, 2007 12:26:06 PM , "Chu Seow Phin"
> <seowphin@xxxxxxxxx> wrote:
> > Hi
> >
> >  
> >
> > I have trying to modify the FOP layout to get rids of queues and parking
> > lots
> >
> > because I am not using these features.
> >
> >  
> >
> > I have more than 40 extensions, and only one outbound trunk.
> >
> > What I want is to display all extensions in more than three columns, and 
> >
> > I want my trunk to be displayed at the same position of the parking lots.
> >
> > However, whenever I try to edit the extensions or add or delete extensions
> >
> > the panel will went wrong with the zap back to position=52?
> >
> >  
> >
> > How do I retain all these default setting during extension maintenance?
> >
> > Which files to look at?
> >
> >  
> >
> > Regards,
> >
> > Chu
> >
> >  
>
> Flash Operator Panel Mailing List
>
> To unsubscribe send an empty message to:
>    <operator_panel-unsubscribe@xxxxxxxxxxxxxxxxxx>
> To get help send an empty message to:
>    <operator_panel-help@xxxxxxxxxxxxxxxxxx>
> The archives can be found at:
>    http://www.asternic.org/archives/maillist.html
>
>
>
>
> Flash Operator Panel Mailing List
>
> To unsubscribe send an empty message to:
>    <operator_panel-unsubscribe@xxxxxxxxxxxxxxxxxx>
> To get help send an empty message to:
>    <operator_panel-help@xxxxxxxxxxxxxxxxxx>
> The archives can be found at:
>    http://www.asternic.org/archives/maillist.html

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature