RE: [Flash Operator Panel] Cannot access FOP from internet

["canuck15" <canuck15@xxxxxxxxxxx>]

I think I got it.  

It's not documented anywhere but I had to edit amportal.conf and change the
following entry:

"AMPWEBADDRESS=mylocalip"
Change to 
"AMPWEBADDRESS="

Also, the default port setting in "manager.conf" is "5038" which I think I
also have to forward on the firewall otherwise I get flashing red on the
extensions in FOP.  I could probably change the port in "manager.conf" to
port 4445 instead of forwarding another port in the firewall but this is all
speculation.

-----Original Message-----
From: Nicolás Gudiño [mailto:nicolas@xxxxxxxxxxxx] 
Sent: Monday, October 30, 2006 4:40 PM
To: operator_panel@xxxxxxxxxxxxxxxxxx
Subject: Re: [Flash Operator Panel] Cannot access FOP from internet

canuck15 escribió:
>  
> I have been pulling my hair out for months trying to get this to work.  
> I have port 4445 forwarded on the router to the Asterisk server.  I 
> have commented out the "web_hostname=mylocalareanetworkip" line so I 
> can access it internally and externally.
>
> Is there anything else I need to do???  I have read all over the place 
> and all I have found is what I did above.
>
> Help please!
>
>
>   
Check your linux firewall rules. Try to telnet to port 4445 and see if it
fails or connects.. Enable the debug icon in the flash panel (changing
op_style.cfg) and open the debug window in the flash side. 
Regards,



Flash Operator Panel Mailing List

To unsubscribe send an empty message to:
   <operator_panel-unsubscribe@xxxxxxxxxxxxxxxxxx>
To get help send an empty message to:
   <operator_panel-help@xxxxxxxxxxxxxxxxxx>
The archives can be found at:
   http://www.asternic.org/archives/maillist.html