RE: [Flash Operator Panel] Cannot access FOP from internet

["canuck15" <canuck15@xxxxxxxxxxx>]

I do not have linux firewall installed. 

Telnet to port 4445 shows it's connected.

Gonna need someone onsite to see what debug is showing when I try get in
remotely so that will have to wait.  I see that port 5038 is set in
manager.conf and there was mention of forwarding that on the firewall in the
FOP documentation.  I tried that but it didn't help.



-----Original Message-----
From: Nicolás Gudiño [mailto:nicolas@xxxxxxxxxxxx] 
Sent: Monday, October 30, 2006 4:40 PM
To: operator_panel@xxxxxxxxxxxxxxxxxx
Subject: Re: [Flash Operator Panel] Cannot access FOP from internet

canuck15 escribió:
>  
> I have been pulling my hair out for months trying to get this to work.  
> I have port 4445 forwarded on the router to the Asterisk server.  I 
> have commented out the "web_hostname=mylocalareanetworkip" line so I 
> can access it internally and externally.
>
> Is there anything else I need to do???  I have read all over the place 
> and all I have found is what I did above.
>
> Help please!
>
>
>   
Check your linux firewall rules. Try to telnet to port 4445 and see if it
fails or connects.. Enable the debug icon in the flash panel (changing
op_style.cfg) and open the debug window in the flash side. 
Regards,



Flash Operator Panel Mailing List

To unsubscribe send an empty message to:
   <operator_panel-unsubscribe@xxxxxxxxxxxxxxxxxx>
To get help send an empty message to:
   <operator_panel-help@xxxxxxxxxxxxxxxxxx>
The archives can be found at:
   http://www.asternic.org/archives/maillist.html