RE: [Flash Operator Panel] Next version

["David Petruzzella" <dpetruzz@xxxxxxxxxxxxxxx>]

All my sip peers are listed in mysql database

-----Original Message-----
From: Joseph [mailto:tech@xxxxxxx] 
Sent: Monday, December 27, 2004 2:38 PM
To: operator_panel@xxxxxxxxxxxxxxxxxx
Subject: RE: [Flash Operator Panel] Next version

On Mon, 2004-12-27 at 14:35 -0500, David Petruzzella wrote:
> You wouldn't happen to know what the setting is? And I assume I would
> add it to the sip.conf file.
Where is your sip peer setup?

If it is in sip.conf
than you would add qualify=200 for example to each peer you want to
monitor.


> -----Original Message-----
> From: Joseph [mailto:tech@xxxxxxx] 
> Sent: Monday, December 27, 2004 2:25 PM
> To: operator_panel@xxxxxxxxxxxxxxxxxx
> Subject: RE: [Flash Operator Panel] Next version
>
> On Mon, 2004-12-27 at 14:23 -0500, David Petruzzella wrote:
> > No they are not monitored.
> Than you need to add the setting to make * monitor them.
>
>
> > -----Original Message-----
> > From: Joseph [mailto:tech@xxxxxxx] 
> > Sent: Monday, December 27, 2004 2:21 PM
> > To: operator_panel@xxxxxxxxxxxxxxxxxx
> > Subject: RE: [Flash Operator Panel] Next version
> >
> > On Mon, 2004-12-27 at 14:07 -0500, David Petruzzella wrote:
> > > Would it matter that all my sip users are stored in a mysql
> database?
> > No, the only thing that matters is that * monitors the extensions
you
> > care about.
> >
> > Doing sip show peers on the command line should show on the right if
> > they are monitored or not.
> >
> >
> > > -----Original Message-----
> > > From: Joseph [mailto:tech@xxxxxxx] 
> > > Sent: Monday, December 27, 2004 11:15 AM
> > > To: operator_panel@xxxxxxxxxxxxxxxxxx
> > > Subject: RE: [Flash Operator Panel] Next version
> > >
> > > On Mon, 2004-12-27 at 11:03 -0500, David Petruzzella wrote:
> > > > Where do I add the qualify parameter on the extension side or on
> the
> > > > flash panel side?
> > > On the asterisk side.
> > > Under sip.conf for sip clients or iax.conf for iax clients.
> > >
> > >
> > > > -----Original Message-----
> > > > From: Nicolas Gudino [mailto:nicolas@xxxxxxxxxxxx] 
> > > > Sent: Wednesday, December 22, 2004 6:29 PM
> > > > To: operator_panel@xxxxxxxxxxxxxxxxxx
> > > > Subject: RE: [Flash Operator Panel] Next version
> > > >
> > > > Hi,
> > > >
> > > > On Wed, 2004-12-22 at 11:13 -0500, David Petruzzella wrote:
> > > > > So it checks automatically and if the extension is not
available
> > it
> > > > > gray's the box out for that particular extension, right?
There
> is
> > > no
> > > > > configuration I have to do?
> > > > If you mean channel availability, as in 'sip show peers', you
need
> > to
> > > > add a qualify parameter to each sip peer, like:
> > > >
> > > > [john]
> > > > username=john
> > > > type=friend
> > > > qualify=500
> > > > secret=xxx
> > > > host=dynamic
> > > >
> > > > Regards,
-- 
respectfully, Joseph ===============
---------------------= **********  =